产品展示 | 联系双虎 |

欢迎访问济南双虎围挡厂官网!

经理

13953162123

您先的位置:首页 > 新闻资讯 > 公司新闻

公司新闻

济南彩钢板房屋面渗漏维修方法

文章发布: 发表时间:2017-07-18 10:18:55

随着市场经济的开展,中国钢铁产业在量、质的方面有了飞跃的开展,给其它职业奠定了坚实的根底,特别是建筑业。改变了以砖、瓦、灰、石为首要的建筑资料格式,呈现了济南彩钢板房。这一建筑结构的呈现使电厂汽轮机厂房、轿车制造业、飞机制造业、大型厂房、大型各种超市、物流仓库等广泛选用。济南彩钢板房最大长处是施工周期短、建筑物资料轻、根底请求条件低、可以大跨度、室内空间大、运用方便等。但也存在必定的疑问,首要疑问是:屋盖、铆钉处、板缝处有渗漏景象,影响到正常运用。

With the development of market economy, China's iron and steel industry in quantity, quality has been a leap forward, to other occupations have laid a solid foundation, especially in the construction industry. Changed to brick, tile, ash, stone as the primary form of building materials, showing the Ji'nan color steel board. The appearance of the building structure is widely used in power plant, automobile manufacturing, aircraft manufacturing, large workshop, large supermarkets, logistics warehouse and so on. Ji'nan color steel board room is the biggest advantage of the short construction period, building materials, light, low requirements of the underlying conditions, large span, large indoor space, easy to use, etc.. But there are also certain questions, the primary question is: roof, rivets, slab joints have leakage phenomenon, affect the normal use.
.
一、铆钉处漏水修理办法:
First, the repair of leakage at the rivet:
使用阳光2000PA单组份防水胶涂刷4次,厚度大约1.5㎜摆布,直径Φ60㎜摆布,下一次涂刷以上一次涂层不粘手为准,并一次比一次涂的直径大Φ15㎜,呈中心厚圆周薄。
The use of sun 2000PA one component waterproof glue brushing 4 times, the thickness of about 1.5 mm diameter and 60 mm at the mercy, mercy, under a brush a sticky coating above as the standard, and a large diameter diameter coated 15 mm thick thin circle is the center.
二、接缝处漏水修理办法:
Two, joint leakage repair method:
1、小接缝修理办法:
1, small joint repair method:
① 可在缝处两头涂刷宽60㎜阳光2000PA单组份防水胶,缝附近20㎜不涂。
In the joint of two 60 mm wide brush sunshine 2000PA one component waterproof glue, 20 mm is not coated with the joints.
②无纺布(或玻璃纤布),布宽150㎜,张贴在涂阳光2000PA防水胶上面。
The non-woven fabric (or glass fiber cloth), cloth width of 150 mm, posted on the 2000PA coated waterproof glue on the sun.
③在无纺布或玻璃纤布上涂刷3遍,涂刷时后一遍比前一遍宽50㎜,厚度1.8㎜摆布。后一次涂刷以上一次涂层不粘手为准。
The glass fiber cloth or non-woven fabric brushing 3 times, besmear again after than before over 50 mm wide, 1.8 mm thickness. After the first coating of the above coating non stick hand.
2、 板接缝较大修理办法:
2, the larger repair method:
①可往缝中填嵌DM-600 密封者 PU 密封胶
Can be embedded into the DM-600 seal embedded PU sealant
②在缝处两头涂刷宽60㎜阳光2000PA单组份防水胶,缝附近20㎜不涂。
In the joint of two 60 mm wide brush sunshine 2000PA one component waterproof glue, 20 mm is not coated with the joints.
③无纺布或玻璃纤布,布宽150㎜,张贴在涂阳光2000PA防水胶上面。
The glass fiber cloth or non-woven cloth, a width of 150 mm, posted on the 2000PA coated waterproof glue on the sun.
④在张贴的布上涂刷3遍阳光2000PA单组份防水胶。涂刷时后一遍要比前一遍宽50㎜,厚度1.8㎜摆布,呈中心厚两头薄,后一次涂刷以上一次涂层不粘手为准。阳光2000PA单组份防水胶,缝附近20㎜不涂。
In the post cloth brushing 3 times the sun 2000PA one component waterproof glue. After brushing again than before over a width of 50 mm, 1.8 mm thickness is at the mercy of center two thick thin, after more than a brush a sticky coating shall prevail. The sun 2000PA one component waterproof glue, 20 mm is not coated with the joints.
③无纺布或玻璃纤布,布宽150㎜,张贴在涂阳光2000PA防水胶上面。
The glass fiber cloth or non-woven cloth, a width of 150 mm, posted on the 2000PA coated waterproof glue on the sun.
④在张贴的布上涂刷3遍阳光2000PA单组份防水胶。涂刷时后一遍要比前一遍宽50㎜,厚度1.8㎜摆布,呈中心厚两头薄,后一次涂刷以上一次涂层不粘手为准。
In the post cloth brushing 3 times the sun 2000PA one component waterproof glue. After brushing again than before over a width of 50 mm, 1.8 mm thickness is at the mercy of center two thick thin, after more than a brush a sticky coating shall prevail.