产品展示 | 联系双虎 |

欢迎访问济南双虎围挡厂官网!

经理

13953162123

您先的位置:首页 > 新闻资讯 > 行业新闻

行业新闻

济南彩钢板房彩钢板的施工要点

文章发布: 发表时间:2017-07-18 11:02:29

彩钢板装置的固定办法有穿透式和暗扣荫蔽式两种。穿透式固定是屋面和墙面彩钢板装置的最常用办法,即用自攻螺钉或铆钉将彩板固定在支持件(如檩条)上,穿透式固定波峰固定、波谷固定或他们的组合。暗扣荫蔽式固定是将与暗扣式彩板配套的特制暗扣先固定在支持件(如檩条)上,彩板的母肋与暗扣的基地肋齿合的固定办法,一般用于屋面板的装置。

Fixed way color plate device through type and dark shade type two. Transmission is the most commonly used way of fixed roof and wall color steel plate device, which is self tapping screw or rivet colorplate fixed on the support member (e.g., purlin) penetrating fixed crest and trough fixed fixed or their combination. Dark shade type fixation is matched with the dark color of button plate special dark buckle first fixed on the support member (e.g., fixed base purlin) to rib rib and mother tooth color plate of the button, the general device for roof panel.
彩钢的侧向和端部搭接。装置每一块钢板时,应将其边搭接精确地放在前一块钢板上,并与前一块钢板夹紧,直到钢板的两头都固定停止。一种简略而有效的办法是用一对夹口钳别离夹住所搭接的钢板。钢板沿纵向就位时,其端部尤其是上端部需用钳子夹住搭边有些,这么可确保钢板一端的就位,并使一端的搭接也处于正确的方位,从而固定住钢板,在固定的过程中,夹钳一直应在纵向夹住钢板。在装置下一块钢板之前,每块钢板有必要彻底被固定住。固定有必要始于钢板的基地,然后向两头伸展,终究固定钢板的搭接边。对于端部搭接,由于屋面和墙面外形板是用接连加工的办法制成的,因而可按运送条件所约束的长度供给钢板,一般不需求搭接,钢板长度就足以满足屋面铺设的需求。
Side and end overlap of color steel. Each piece of steel plate, the edge should be accurately placed on the front of a piece of steel plate, and the front plate clamping, until both ends of the steel plate are fixed. A simple and effective method is to use a pair of pliers to separate the steel plate. Steel plate along the longitudinal position, the upper end of the end especially need pliers clamp on some edge, so that the plate is in place, and the end of the lap is in the right direction, so as to fix the plate, in the process of fixed clamp has in vertical clamp plate. Prior to the installation of a piece of steel plate, each plate is necessary to be completely fixed. It is necessary to start at the base of the steel plate, and then extend to both ends. For the end of the lap, the roof and wall plate shape is made of a series of processing methods, which can be delivered according to the length of steel supply conditions constraints, generally do not need the lap, the length of the plate is enough to meet the needs of the laying of the house.
出于对现场处理和运送思考,必要时可用两块较短的钢板经过端部搭接来掩盖全部长度,每一列钢板的搭接次序顺次从底部到顶部,然后再放下一列。对运用穿透式固定法的屋面和墙面钢板端搭接需定位在支持上。对斜度在1/12(50)~1/4(150)之间的屋面,钢板端部重迭长度最少为200mm;斜度超越1/4(150)时,重迭长度最少为150mm,而且钢板端部重叠有些的中点应在支持件的基地。墙面板最小重迭长度为100mm。
In view of the handling and transport of the site, two short plates may be used to cover the entire length of the plate when necessary, and the order of the overlap of each plate shall be followed from the bottom to the top, and then a column shall be laid down. The roof and wall steel plate joint with the method of penetrating fixation should be positioned on the support. On the slope in 1/12 (50) ~1/4 (150) between the roof plate, the end overlapping length is at least 200mm; slope beyond 1/4 (150), the overlap length of at least 150mm, and the steel plate end overlap some of the support base in the middle. The minimum overlap length of wall panel is 100mm.
 自攻螺钉的选用。济南彩钢板房的 固定螺钉选用时应当依照结构的运用寿命选择固定件,而且格外留意外覆资料的寿命与指定的固定件寿命是不是共同。一起留意钢檩条厚度不能超越螺钉的自钻才干。现在供给的螺丝可带有塑料头、不锈钢顶盖或涂有格外的耐久保护层。别的,除暗扣固定用螺钉外,其他螺钉均带有防水垫圈,而且关于采光板的格外风压下的状况均配有相应的专用垫圈。
Selection of self tapping screws. Ji'nan color plate housing fixed screws should be selected in accordance with the structure of the life of the use of fixed parts, and pay special attention to the life of the material covered with the specified life is not a fixed joint. Together with attention to self drilling ability can not exceed the thickness of steel purlin screw. Now the screw can be provided with plastic head, stainless steel cover or coated with extra durable protective layer. Anything else, except the button is fixed by screws, other screws with waterproof gasket, and a lighting plate is caused by wind conditions are equipped with the corresponding special gasket.
济南彩钢板房的装置较易把握,而一些细节的处理对比主要。关于济南彩钢板房屋面用彩钢板应当在房顶及屋檐处将彩钢板进行相应的收边作业,其意图是为了更有效地阻挠雨水进入屋面以内。
Ji'nan color steel board of the device is easy to grasp, and some of the details of the main treatment. On the Ji'nan color steel plate with the color plate should be in the roof and eaves of the color steel plate corresponding to the edge of the operation, its intention is to more effectively obstruct the rain into the roof.
屋面外板在屋脊的当地,都可用收边东西将坐落钢板终端肋条之间的地盘向上折。它用于一切斜度低于1/2(250)屋面钢板的上端,以确保在泛水板或盖板下方由风吹入的水下不会流入修建当中。边收边操作可在钢板定位之前施行,也可在钢板装置以后施行,但后一种办法要在钢板的顶端留有满足的空隙(约50mm),便于收边作业的操作。其具体操作办法是:把收边东西坐落钢板终端地盘之上,尽快将东西滑于钢板之上,越里越好。用东西抓住钢板终端,将地盘往上折,上折约800,如上所述,折弯每一地盘。当板被用在斜度低于1/5(100)的屋面时,应将钢板下端的地盘端部略微向下曲折,可用同一收边东西来完成,这么可确保雨水顺着钢板终端被扫除,而且不会因毛细或风力效果回流至平地盘的下边。
The local board in the roof of the roof, all available edge things will be located between the steel plate rib site fold up terminal. It is used for all slope is lower than that of 1/2 (250) at the top of the roof plate, in order to ensure the water board orbelow cover by the wind blowing water will not flow into the construction. Edge closing operation can be carried out before the steel plate positioning, but also in the steel plate device after the implementation, but the latter approach to the top of the steel plate to be left to meet the gap (about 50mm), to facilitate the operation of the closing operations. The specific method of operation is: the edge of the thing is located on the steel plate terminal site, as soon as possible to slide on the steel plate, the better the better. Seize the steel plate with the tool, the site will be folded up, about 800 fold, as described above, bend each site. When the plate is used in the slope is lower than that of 1/5 (100) of the roof, the end of the site should be slightly lower plate bends downward, by the same edge things to do, so that rain down the steel terminal to be swept away and not due to capillary or wind effect back to the site under the flat side.
向下的折边操作有必要在屋面钢板被固定以后才干进行,否则这项操作将会遭到妨碍。下折板的边端时,恰当张开下撬东西的口,将东西夹住地盘端,尽量向里堆。东西紧贴在地盘端部,一起将手柄摇摆约200,这么在钢板的端部会构成一向下折边。
It is necessary to have a downward flanging operation to be carried out after the roof plate is fixed, otherwise the operation will be affected. Under the flap edge, right under the open mouth will pry things, things between sites as far as possible to end in the heap. Close to the end of the site, the handle will swing about 200, so that the end of the plate will form a downward fold.
关于十分长的屋面钢板,应设置弹性节点,距离不得大于下表中所列数据,以便客服纵向热位移。这关于穿透固定式来说,在两弹性节点之间,仅能设置一个穿透固定的搭接。
On the very long roof steel plate, should be set elastic node, the distance should not be greater than the data listed in the table below, so that customer service longitudinal thermal displacement. In this regard, through the fixed type, in the two elastic nodes, can only be set to a fixed through the overlap.
一般来说,在用于济南彩钢板房屋面和墙面板的一切金属中,钢的热胀冷缩到现在停止是最低的。
In general, in all the metals used in the Ji'nan color steel plate housing and wall panels, the heat expansion and contraction of steel is the lowest.
事实上,在钢板的终端和终究支持之间的胀大或缩短位移仅仅表中所显示数据的一小有些,由于被固定的钢板位移,通长是从基地开端趋向于钢板的每个端部。每端的位移量仅仅胀大或缩短量的一半。同样在修建结构或屋面结构中也有一些温度改变位移,尽管不如屋面那么大,但仍减少了屋面板和其支持面之间的位移。终究,由于檩条的屈曲,格外是在跨中,更进一步减少了这种差动位移。
In fact, in the steel plate between the terminal and swell or shorten the displacement of support will only display the data in the table a little some, because the steel plate displacement is fixed, usually from each end of the base plate tends to start. The displacement of each end is only half or half of the amount. There are also some temperature changes in the construction of the structure or roof structure, although not as large as the roof, but still reduced the displacement between the roof and its support surface. After all, due to the purlin buckling, especially in the cross, to further reduce the differential displacement.
外形板都有相应的成型泡沫密封条。当它们被嵌在济南彩钢板房屋檐支持面和屋面板下边之间时(用作屋檐密封),这一底部密封带能够避免灰尘、昆虫、鸟、啮齿动物以及雨水进入肋条空间内。
The shape plate has the corresponding forming foam sealing strip. When they are embedded in the Ji'nan color plate of eave roof panel between the support surface and bottom when (used as the roof seal), bottom sealing tape to avoid dust, insects, birds, rodents and rainwater into the rib space.
能够沿泛水板和盖板的下方,将一顶部有概括的成型条嵌入泛水板下方和屋面板顶面之间,并用双面胶进行恰当的固定,从而起到类似的密封效果。这一点很主要,不进行这样的处理,会形成房屋的漏水。
Can be below the water board and the cover plate, a top between the general molding strip is inserted into the water board and the roof panel below the top surface, and use double-sided adhesive properly fixed, so as to play a similar sealing effect. This is very important, do not carry out such a treatment, will form the housing leakage.